![]() FltPlan is now part of the Garmin Connext system. Read our full review on it here.įltPlan Go is completely free and can be downloaded from the app store. Streamline your flight planning with FltPlan and Garmin. Stratus 3 is available now for a $699 introductory price. Tap one of the targets for additional information: The traffic layer will display nearby aircraft, and the inner-circle is color-coded based on proximity to your current altitude: PIREPs are shown with a small cartoon pilot symbol on the map and can be tapped to show the full report: You can also view METARs and TAFs in flight on the Airports screen: Winds Aloft & Wind Streamlines Aviation Weather Use these tools to get. ![]() It’s not quite as crisp as you’ll find in other apps, but that’s really not a limitation since ADS-B datalink radar shouldn’t be used tight navigation around convective weather:ĪDS-B METARs are depicted with square symbols, and not the small circles you’re used to seeing when connected to the internet. Welcome to FltPlan, a free flight planning service for creating and filing IFR. Regional radar features the highest resolution and will be displayed within 250 NM of your present location. Tap the circle next to each layer name to enable the respective weather type. After selecting ADS-B, you’ll see weather layer options on the left side of the screen: To display ADS-B weather on the map, you’ll use the layer options under the ADS-B tab, not the internet-based METAR, SIGMETs and Weather buttons across the middle of the screen. Step 3: Displaying ADS-B weather in FltPlan Go Select Stratus 3, and you’ll instantly see connection stats, Stratus 3 details and ADS-B status. When you first launch FltPlan Go and go to the ADS-B section of the Maps screen, you’ll see a message instructing you to connect your ADS-B unit: Tap the External button on the left side of the screen, and you’ll see a list of compatible ADS-B receivers. Tap the “External” button on the left side of the screen, and you’ll see a list of compatible ADS-B receivers. When you first launch FltPlan Go and go to the ADS-B section of the Maps screen, you’ll see a message instructing you to connect your ADS-B unit: Stratus 3 is now ready to connect to other EFB apps. Supports ForeFlight, FlyQ EFB, Navigator, AvNav, WingX, Avare EFB, FltPlan Go, DroidEFB, AerovieReports, Avplan EFB, iFly GPS, DroidEFB, OzRunways EFB. Built using Raspberry Pi 3 board and parts direct from Stratux project founder. You’ll see Stratus Settings on the left side of the screen, with a toggle for Open ADS-B Mode – turn this on. COMPATIBILITY: Stratus 2S functionality at Scout prices. Open up the Stratus Horizon app, and tap the Settings button in the lower left corner. After the app downloads, turn on Stratus 3 and connect your iPad to the Stratus WiFi. This requires you to download Appareo’s free Stratus Horizon Pro app from the app store to configure the setting. Step 1: Enable Open ADS-B Mode on Stratus 3īefore connecting Stratus 3 to a compatible EFB app other than ForeFlight, you’ll first need to enable the GDL 90 mode on the device. Here we’ll show the connection process when using Stratus 3 with FltPlan Go and how to view the ADS-B traffic and weather layers in the app. While Stratus 3 works right out of the box with ForeFlight, there are a few additional things you’ll need to do first to get it linked up with one of these apps. The free FltPlan Go app is an indispensable companion to the FltPlan website and incorporates essential features and tools for in-flight and offline use. One of the big changes over previous models is that it added support for apps other than ForeFlight allowing it to provide subscription-free ADS-B weather and traffic to apps like FltPlan Go, WingX Pro and FlyQ. ![]() Built using Raspberry Pi 3 board and parts direct from Stratux project founder.Appareo released the Stratus 3 ADS-B receiver last month, building on the success and reliability of previous-generation Stratus receivers. Supports pass-through charging.ĬOMPATIBILITY: Stratus 2S functionality at Scout prices. Just plug in included rechargeable battery pack for 4+ hours of flying time. FltPlan Go - The free FltPlan Go app is an indispensable companion to the FltPlan website. ![]() LATEST FIRMWARE: Latest Stratux software (v1.5rb1) is already loaded on MicroSD card. Provides ADS-B traffic and weather information and navigation GPS position using internal GPYes WAAS GPS receiver, supports multiple iPads, iPhones, or Android tablets connected via WiFi. PORTABLE: Stratux is a highly portable receiver including a suction mount for window mounting. RELIABLE INFORMATION: High-gain dmurray14 antennas are optimized for 978 MHz and 1090 MHz frequencies allowing you to receive and display air-to-air traffic, data, and FIS-B weather including animated regional and CONUS NEXRAD, METARs, TAFs, AIR/SIGMETs, PIREPs, winds and temps aloft, TFRs, NOTAMs, and SUA information. ASSEMBLED ADS-B IN UNIT: Stratux dual band ADS-B receiver includes AHRS, fan controller, 6000mAh battery pack, suction mount, strap, SD card adapter, supports ForeFlight Synthetic Vision and other popular EFBs. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |